FASTEN® [Polymeric(Geo) strip]
FASTEN® FS(E) 50
Product Description
GECO FASTEN® is a polymeric reinforcing strip which used in MSE walls in civil engineering works such as road, harbor, and bridges. FASTEN®’s components are high tenacity polyester fiber tendons encased in a polyethylene (LDPE) sheath coating which increases the durability of fiber tendons from physical and chemical damages. FASTEN® reinforces frictional force and stability in soil, the connection strength between facing panel and back panel. Easy installation, 120 years of durability and cost matters ensure FASTEN® competitiveness. FASTEN® FS(E) has about 30% thinner thickness compare to normal FS type. FS(E) type is suitable under softer soil conditions such as sand, due to less polyethylene coating.
| Product Description | |||
|---|---|---|---|
| FASTEN® Kind | FS(E) | ||
| Type | kN | 50 | |
| Weight | g/mr | 140 ± 10% | |
| Width | ASTM D3774/ EN ISO 9863 | mm | 90 ± 3 |
| Thickness | ASTM D5199 /EN ISO 9863 | mm | 1.8 ± 0.3 |
| Core Material | PET | ||
| Body Material | PE | ||
| Mechanical Properties | |||
|---|---|---|---|
| Tensile Strength | ASTM D4595 /EN ISO 10319 | kN/Full Width | >50 |
| Elongation | ASTM D4595 /EN ISO 10319 | % | <12 |
| Roll Length | m | > 100 | |
- The given values are indicative and correspond to average results. The results are based on our laboratory and certified testing institutes.
- 10% of Mechanical properties can be varied, due to standard deviation. Products are subject to continuous development and improvement and these values may change over time.
- For any inquiries regarding technical consultant please contact technical department by e-mail: techsupport@gecoind.com